EXFO FTB-200 User Manual Download

Page: 161 / 222

Managing Data

Compact Modular Platform

151

Connecting to a VPN from Your Unit

From the VPN Installer, select the corresponding setup file using the

Browse

button.

Note:

Depending on the VPN client that you have selected previously, you may
have two installation files to select (two

Browse

buttons instead of one).

For more information, refer to the online help provided with the VPN
Installer.

Tap the

Install

button.

Follow the on-screen instructions.

Your unit will restart automatically to complete the installation of the VPN
client. All users will now be able to connect to a VPN from the unit.

To connect to a VPN from your unit:

Start the VPN client and follow the on-screen instructions.

If you are not sure about the information that you should provide, contact
your network administrator.

MPORTANT

To avoid installation problems, ensure that the installation files are
available from the Windows desktop of your unit. Never use
installation files directly from a USB key.

Summary of Contents for FTB-200































































































































































































































Search results

Summary of Contents for FTB-200

Reviews:

Related manuals for FTB-200

Brands by name

Popular brands

EXFO FTB-200, User Manual

Search results

Summary of Contents for FTB-200

Reviews:

Related manuals for FTB-200

Brands by name

Popular brands