EXFO CT440 Series, User Manual

Page: 19 / 169

CT440
13
2 Safety Information
W
ARNING
Do not install or terminate fibers while a light source is active. Never look directly
into a live fiber and ensure that your eyes are protected at all times.
W
ARNING
The use of controls, adjustments and procedures, namely for operation and
maintenance, other than those specified herein may result in hazardous radiation
exposure or impair the protection provided by this unit.
W
ARNING
If the equipment is used in a manner not specified by the manufacturer, the
protection provided by the equipment may be impaired.
W
ARNING
Use only accessories designed for your unit and approved by EXFO. For a complete
list of accessories available for your unit, refer to its technical specifications or
contact EXFO.
I
MPORTANT
When you see the following symbol on your unit , make sure that you refer
to the instructions provided in your user documentation. Ensure that you
understand and meet the required conditions before using your product.
I
MPORTANT
When you see the following symbol on your unit , it indicates that the unit is
equipped with a laser source, or that it can be used with instruments equipped
with a laser source. These instruments include, but are not limited to, modules and
external optical units.
I
MPORTANT
Other safety instructions relevant for your product are located throughout this
documentation, depending on the action to perform. Make sure to read them
carefully when they apply to your situation.