WA-1100/WA-1600 Wavemeter Operating Manual
1 Introduction
1-2
08115-M-00 Rev E
The Monitor port on the back of the instrument provides access to the interferometer
fringe signals and timing signals that govern the wavelength measurement. Refer to
Appendix D for further information.
Safety Considerations
This product has been designed, manufactured and tested in accordance with EC
Standard EN61010-1, Safety Requirements for Electronic Measuring Apparatus, and has
been supplied in a safe condition. Make sure that you follow the recommendations in this
section to ensure safe operation of your instrument and to maintain the product in a safe
condition.
Laser Classification: This product is classified FDA Laser Class I (IEC Laser Class 1)
laser.
WARNING
THIS EQUIPMENT MUST BE USED AS SPECIFIED OR THE
PROTECTION PROVIDED BY THE EQUIPMENT MAY BE
COMPROMISED. YOU MUST USE THIS PRODUCT IN A NORMAL
MODE AND SHOULD NOT DEVIATE FROM THE WRITTEN
INSTRUCTIONS PROVIDED.
WARNING
THERE ARE NO OPERATOR SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED PERSONNEL. TO PREVENT
ELECTRICAL SHOCK, DO NOT OPEN OR REMOVE COVERS.
WARNING
TO PREVENT ELECTRICAL SHOCK, TURN OFF THE POWER TO
THE INSTRUMENT BEFORE CLEANING. USE A DRY OR
SLIGHTLY DAMPENED (WITH WATER) CLOTH TO CLEAN THE
EXTERNAL PARTS. DO NOT ATTEMPT TO CLEAN ANYTHING
INSIDE THE MACHINE.
WARNING
THIS IS A SAFETY CLASS 1 PRODUCT . PLUG THE MAIN
POWER CORD INTO A SOCKET OUTLET PROVIDED WITH A
PROTECTIVE EARTH CONTACT. ALWAYS USE A THREE-
PRONG AC POWER CORD WITH THIS EQUIPMENT. FAILURE
TO ENSURE ADEQUATE GROUNDING MAY CAUSE
INSTRUMENT DAMAGE.
Unpacking & Inspection
The WA-1100 and WA-1600 are packed in a carton designed to give maximum
protection during shipment. If the outside of the shipping carton is damaged, notify your
shipping department immediately. Your shipping department may want to notify the
carrier.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
