15
ADJUSTMENTS
Adjusting the Handlebar Height
TIP: When adjusting the height of Front Post (5), the STOP line cannot be higher than the
edge of plastic bushing. See Fig. C.
Loosen the
Spring Knob (25)
by turning it COUNTER-CLOCKWISE direction until it can be pulled
out. Pull out the
Spring Knob (25)
and then slide the
Front Post (5)
up or down and settle on the
desired height. Lock the
Front Post (5)
in place by releasing the
Spring Knob (25)
and sliding the
Handlebar Post (5)
up or down slightly until the
Spring Knob (25) "POPs"
into the locked position.
Tighten the
Spring Knob (25)
in a CLOCKWISE direction.
Adjusting the Seat Post Height
Loosen the
Spring Knob (77)
by turning it in the COUNTER-CLOCKWISE direction until
it can be pulled out. Pull out the
Spring Knob (77)
and then slide the
Seat Post (4)
up or
down direction to the suitable position. Lock the
Seat Post (4)
in place by releasing the
Spring Knob (77)
and sliding the
Seat Post (4)
up or down slightly until the
Spring Knob
(77)
"pops" down into the locked position. For added safety, tighten the
Spring Knob (77)
in a clockwise direction.
NOTE: When adjusting the height of seat post, the STOP line cannot be higher than
the edge of plastic bushing. See Fig. D.
Spring Knob (25)
Front Post (5)
Spring Knob (77)
Seat Post (4)
Fig. D
Fig. C
