18
CONSOLE
SPECIFICATIONS:
TIME -----------------------------0:00-99:59 MIN:SEC
SPEED --------------------------0.0-99.9 ML/H
DISTANCE ---------------------0.0-999.9 ML
CALORIE -----------------------0.0-9999 KCAL
CONSOLE FUNTIONS:
MODE:
Press the “MODE” button to select between, SCAN,SPEED,DISTANCE,TIME, and CALORIES.
AUTO ON/OFF:
The console will automatically turn on when pedaling begins. The console will
automatically turn off after 4 minutes of inactivity.
SCAN:
Press the
“MODE” button until the arrow (◄) points to “SCAN”. The console will automatically scan
the workout statistics of TIME, SPEED, and DISTANCE, every 6 seconds.
TIME:
Press the
“MODE” button until the arrow (◄) points to “TIME”. The console will display the total time
exercised in minutes and seconds. The console automatically counts up from 0:00 to 99:59 in one second
intervals.
SPEED:
Press the
“MODE” button until the arrow (◄) points to “SPEED”. The console will display your
current workout speed in miles per hour.
DISTANCE:
Press the
“MODE” button until the arrow (◄) points to “DIST”. The console will display the
distance traveled during each workout up to a maximum of 999.9 miles.
CALORIE
: Press the
“MODE” button until the arrow (►) points to “CAL”. The console will estimate the
cumulative calories burned during a workout. The console will count up from 0.0 to
9999
calories.
When the MyCloudFitness logo is blinking, it is scanning for bluetooth devices. Once its
paired to a device the MyCloudFitness logo will stop blinking.
RESET:
Hold this button for 4 seconds to reset all values from the console, Except ODOMETER.
HOW TO INSTALL THE BATTERIES:
1.
Remove the battery cover on the underside of the
Desk (88)
.
2.
Place two "SIZE-AAA" batteries into the battery housing.
3.
Insure the batteries are correctly positioned and the battery springs are in proper contact
with the batteries.
4.
Re-install the battery cover.
5.
If the display is illegible or only partially legible, remove the batteries and wait 15 seconds
before reinstalling.
Summary of Contents for ExerWorK Series
Page 5: ...3 LABEL PLACEMENT...
Page 8: ...6 OVERVIEW DRAWING...
Page 9: ...7 OVERVIEW DRAWING...
Page 12: ...10 HARDWARE TOOLS PACK...