19
ADJUSTMENT
ADJUSTING THE REAR STABILIZER END CAP:
Adjust the
Rear Stabilizer End Caps (43)
on the
Rear Stabilizer (3)
as needed to
level the recumbent bike.
ADJUST THE ADJUSTABLE LEVELER:
If the bike is bouncing when in use, turn the
Adjustable Leveler (45)
so that is
making contact with the floor.
Do not extend the Adjustable Leveler (45) too far,
as this will cause the bike to tilt and be off balance
.
ADJUSTING THE SEAT
FORWARD OR BACK:
Loosen the
Round Knob (50)
in a counter-clockwise direction until the seat is
loosen, Standing behind the seat, use two hands to push or pull the
Backrest (54).
Once you find the position you like, lock the
Seat Bracket (6)
into place by turning
the
Round Knob (50)
in a clockwise direction until it is secured tightly.
Round Knob (50)
16
Seat Bracket (6)
Rear Stabilizer End Cap (43)
Rear Stabilizer (3)
Adjustable Leveler (45)
Backrest (54)
Summary of Contents for ExerWorK Series
Page 5: ...3 LABEL PLACEMENT...
Page 8: ...6 OVERVIEW DRAWING...
Page 9: ...7 OVERVIEW DRAWING...
Page 12: ...10 HARDWARE TOOLS PACK...
