18
ASSEMBLY
Step 8
Assemble Foot Pedals:
The parts are marked with an “R” for right side and “L” for left side.
Place the
Left Foot Pedal (22L)
on top of the
Left Foot Bar (9L)
, and align to the holes. Insert two
Carriage Bolts (43)
into the aligned holes of the pedal and bar Left Foot Pedal (22L). Secure the
bolts in place using two
Washers (46)
and two
Nylon Locknuts (45)
. Tighten the bolts with the
Multi-Hex Tool with Phillips Screwdriver
provided.
Repeat the same assembly steps to install the
Right Foot Pedal (22R)
onto the
Right Foot Bar
(9R)
.
Note:
There are four holes on the
Left Foot Bar (9L)
&
Right Foot Bar (9R)
which allow for two
different positions. Once the machine is completely assembled you can test which positions suit
you best. Both the Left Foot Pedals (22L) & the Right Foot Pedals (22R) should be installed in the
same position on both sides.
Tool:
Multi Hex Tool with Phillips
Screwdriver 1PC
(43) Carriage Bolt
4 PCS
(45) Nylon Locknut
4 PCS
(46) Washer
4 PCS
Hardware:
Summary of Contents for 1317.5-101016
