15
ASSEMBLY
Step 5
Assemble Handlebar.
Use the
5mm Allen Wrench
to remove two
Hexagon Socket Head Bolts (32)
, two
Spring
Washers (80)
, and two
Curve Washers (38)
from the
Front Post (4)
.
Attach the
Handlebar (5)
to the
Front Post (4)
using the previously removed hardware: two
Hexagon Socket Head Bolts (32)
, two
Spring Washers (80)
, and two
Curved Washers (38)
.
Tighten the bolts using the
5mm Allen Wrench
until they are firm and secure.
There will be another set of
Hand Pulse Sensor Wires (17)
coming out from the
Handlebar (5)
Connect that set to the other set of
Hand Pulse Sensor Wires (17)
coming from the console as
shown in
Figure
AA-3
.
Slide the
Wire Plug (89)
over the
Hand Pulse Sensor Wires (17)
and carefully tuck the excess
Hand Pulse Sensor Wires (17)
and
Wire Plug (89)
into the right side of the
Front Post (4)
.
5mm Allen Wrench
1PC
Tool:
Summary of Contents for 1317.5-101016
