RME2-AI-IA3 Analog Variables Acquisition Module – User’s Manual
Exemys
www.exemys.com
Rev. 1
25
5.
SNMP
5.1.
Configuration and Operation
RME2-AI-IA3 Supports SNMP protocol v 1. It can also generate traps, for notification of
changes in alarm status.
In the menu Configuration -> SNMP, it is possible to enable or disable this service.
When setting up the reading community and the reading / writing community, you must
consider that both communities cannot have the same name.
It can also enable or disable the sending of traps and configure up to 2 IP Manager addresses
(addresses to which the SNMP traps will be sent).
It should be clarified that if the same IP addresses are configured in the two IP Manager
fields, the alarms will arrive duplicated.
5.2.
MIB
This file describes the set of objects or parameters of the RME2-AI-IA3 accessible by SNMP.
You can download the RME2-AI-IA3.MIB file from:
www.exemys.com/documentation
RME2-AI uses the same MIB file as its previous model (RME1-AI).
Besides to its own parameters, the RME2-AI-IA3 responds to the "System Group" queries:
sysDescr, sysObjectID and sysUpTime
and it also sends the Warm Boot and Cold Boot traps
and inform the changes of the alarms status that have been configured for each input,
sending traps.
