Vehicle Setup
6999-0006 Rev. A
1-29
Cleaning the Motorcycle
Before washing the motorcycle, make sure the engine and
exhaust pipes are cool.
Wash the motorcycle indoors or in the shade to prevent water
spotting.
1.
Rinse off as much dirt as possible with low pressure
water.
Caution
• Do not spray or allow water to come into contact with
electrical components or connectors. Electrical compo-
nents may be damaged by contact with water.
• Use as little water as possible when washing near the
air cleaner or the exhaust pipe openings. An
excessively wet air cleaner or water in the exhaust
pipes may cause the engine to start and run poorly.
2.
Wash the entire motorcycle using a soft cloth or sponge
soaked in a solution of mild detergent and warm water. Apply
minimal pressure as you wash; let the detergent do the
cleaning. Excessive washing pressure may cause dirt, sand,
or other foreign materials on the motorcycle to scratch the
finish.
3.
Rinse the motorcycle with water running at low pressure.
4.
Dry all components thoroughly before starting the
engine.
5.
Start the engine and let it idle for a few minutes.
6.
Make sure the brakes are functioning properly before
riding.
Notice
Excessively wet brake pads or discs may diminish
braking effectiveness. Dry these components
thoroughly before using the motorcycle.
10584
