1-22
6999-0006 Rev. A
Vehicle Setup
Emergency Flashers
1. Slide the emergency flasher switch to the left. All
four turn signals should flash.
2. Slide the switch to the right to cancel the
emergency flashers.
1. EMERGENCY FLASHER SWITCH
Running Lights
The two amber front running lights and the tail light should be
illuminated. The licence plate light should also be illuminated.
1. RUNNING LIGHTS
2. LICENSE PLATE LIGHT
Brake Light
1.
Apply slight pressure to the front brake lever. The tail light
brightness should increase.
2.
Apply slight pressure to the rear brake pedal. The tail
light brightness should increase.
1. TAIL LIGHT
Starting the Engine
The motorcycle has a closed loop, port sequential, fuel
injection system. The system adjusts the fuel mixture and the
ignition timing based on combustion efficiency. The ECM
makes all adjustments necessary for starting and running the
engine in all temperatures and other ambient conditions.
Use the following procedure to start the motorcycle and
check the specific components indicated.
10575
10427
10602
10533
