Vehicle Setup
6999-0006 Rev. A
1-17
Fuel Tank
Fill the motorcycle with the recommended fuel (see Super X
Specifications page 1-30) and check the fuel system for
leaks.
1.
With the motorcycle on the sidestand and on level
ground, remove the right fuel cap.
2.
Fill the fuel tank to a level aprox. 3/4” below the bottom of
the fuel filler insert.
WARNING
• Overfilling the fuel tank may cause fuel to overflow
when it expands.
• Fuel may leak from an improperly sealed or tightened
fuel cap. Tighten the fuel cap until you hear one or more
distinct clicks. Be certain the fuel cap is properly sealed
and tightened before starting the engine.
Caution
Fuel can damage painted surfaces and plastic parts.
Wipe spilled fuel immediately from the motorcycle
using a clean, dry, soft cloth.
1. FUEL FILLER INSERT
2. FUEL FILL HEIGHT
3.
Inspect the fuel hose and its connection to the fuel pump
and to the fuel rail. Check for dampness or stains from
leaking or dried fuel.
1. FUEL HOSE
2. FUEL PUMP
Evaporative Control System
(California Only)
Visually inspect all hoses and connections. Make sure all
connections are tight. Also, inspect the evaporative canister
to make sure it has not been damaged.
1. EVAPORATIVE CANISTER
10562
10563
10564
