manualshive.com logo in svg

Excelsior-HENDERSON Super X 1999, Handbook

Share
Download
Excelsior-HENDERSON Super X 1999 Handbook Download Page 1

6999-0006 Rev. A

Forward

6999-0006 Rev. A

All text, photographs, and illustrations in this handbook are based on the most current
product information available at the time of publication. Product improvements or other
changes may result in differences between this handbook and the motorcycle.
Excelsior-Henderson reserves the right to make production changes at any time, without
notice and without incurring any obligation to make the same or similar changes to
motorcycles previously built.

EXCELSIOR-HENDERSON MOTORCYCLE MANUFACTURING COMPANY

805 HANLON DRIVE • BELLE PLAINE, MINNESOTA 56011 • TELE: 612.873.7000/FAX: 612.873.7030

Copyright© 1999 Excelsior-Henderson Motorcycle Manufacturing Company. All rights reserved.

Excelsior-Henderson

, the X & Bar logo,

Super X,

and

Rider’s Handbook

are trademarks of the Excelsior-Henderson Motorcycle Manufacturing Company.

Dunlop

is a registered

trademark of the Dunlop Tire Corporation.

RiderCourse

is a registered trademark of the Motorcycle Safety Foundation.

Summary of Contents for Super X 1999














































Reviews:

No comments

Brands by name

Popular brands

Load more brands