3
Please read this operation manual carefully
before
installing and using this unit !!!!
Please read the following;
1. Please read the operation manual carefully before installing and operating the product.
2.
The actual dome requires a
12v DC
power supply with a minimum rating of
1.2Amps
. The rated input
voltage of the camera is also 12v. This gets its power from the dome and does not require a separate PSU.
Do not connect 24V AC to the dome under any circumstances!!
3. During the course of transportation, storage and installation, the product should be handled with care
avoiding vibration and any weight pressure, which may cause damage to the sophisticated optical and
electronic equipment inside the machine.
4. Do not attempt to disassemble the camera. In order to prevent electric shock, do not remove screws or
covers. There are no user-serviceable parts inside the camera.
5. Always use and adhere to current electrical safety standards to install and use the dome. Use a correctly
rated power supply. The RS-485 and video signal cables should be kept way from other high voltage
equipment such as mains cables and especially fluorescent lights. Using an anti surge protection device is
recommended to prevent damage to the domes from lightning and mains surges. Damage to domes by
lightning or mains voltage surges is not covered under the dome’
s warranty.
6. Do not operate in areas exceeding the stipulated limitations concerning temperature, humidity and power
supply.
7. Do not aim the camera directly towards the sun or an extreme light source whether it is switched on or
not. Do not let the camera focus on bright and stationery objects for a long time. Doing either of these
may damage the camera.
8. Do not use strong detergents to clean the main body of the camera as these may damage the dome cover
or paintwork. Wipe dirt with dry cloth. If needed a
mild
detergent can be used.
9. Operate the dome camera with great care to avoid shock or vibration. If operated incorrectly, the Dome
could be damaged.
10. Ensure the dome is not dropped. Never mount the unit on a ceiling that cannot support its weight.
11. If necessary, use a commercial lens cleaning paper to clear the lens windows. Gently wipe the lens window
until clean.
NOTE –
This is a 12v D.C camera !!
Applying any other voltage to it
will damage the unit and void the
warranty.
