4
The excelPTZ dome range –
Economic Range
A basic PT dome camera for budget applications, which incorporates a standard 3.6mm colour
camera. The dome case is made out of metal for a robust attractive appearance. It has a
multifunctional decoder and an on-board processor for logic handling. The dome is easy to connect,
install, maintain and operate. The dome is compact with a modern and appealing appearance.
The dome fits directly to a ceiling or overhead surface, but can also be mounted on a wall using a
wall mount bracket (PTZ102). The base is of metal construction and the dome is waterproof
meeting the IP66 standards.
This is the most basic of the Economic series and only has a Pan and Tilt mechanism with a
standard 3.6mm lens with no zoom facility. It does not have the capabilities of the advanced
functions of the 300 and 400 series but does allow up to 32 preset positions and a tour option.
Description of Functions
1. Integrated Multi-Protocol Decoder
The integrated multifunctional decoder can communicate with 5 different protocols. The baud
rate can be independently set allowing compatibility with systems with selectable baud rates
from 2400 bps to 19200 bps.
2. Dip Switches
Dip switches control the selection of the protocol, baud rate and camera addresses making this
dome camera easy to set up and use.
3. RS485 Interface
This dome uses RS485 serial control and can address from 1 to 1023 cameras using binary
addresses.
4.
Rotation Range, Speeds and Limitations
The dome can turn 0-360
º
horizontally and 0-90
°
vertically at a speed of 0 -12
°
per second.
5. Scan Facilities
The dome can Auto Scan between two positions with a dwell time of 4 seconds at each
position and a scan speed of 7.5
°
per second. The scan can be initiated by using a keypad.
6. Presets
The dome can store up to 32 presets and is capable of running a tour/patrol utilising a
maximum of 16 presets. All presets are stored in the dome’
s non-volatile memory and retained
during power loss.
KEY FUNCTIONS