OPERATION
The Excelpool System is an automatic chlorine generation system
for pool & spa sanitation. The operation requires a low
concentration of salt (sodium chloride) in the pool water at levels
low enough that it normally cannot be tasted. Excelpool System
automatically sanitizes your pool by converting the salt into free
chlorine, which kills bacteria and algae in the pool through a
process called electrolysis.
Excelpool System is designed to handle the purification needs of
the average residential swimming pool up to 40,000 gallons
(150,000 liters). The actual amount of chlorination required to
properly sanitize a pool varies depending upon bather load,
rainfall, air temperature, water temperature, pool’s exposure to
sunlight, pool’s surface, and cleanliness.
Note: It is not recommended using the Excelpool System to
generate Bromine. If your pool has natural stone as coping or
decking, please check with a stone installation specialist for the
maintenance of the stone before installing the Excelpool System.
WATER CHEMISTRY
As with any pool, it is important that you maintain proper water
chemistry of the pool water, including pH, alkaline content, and
calcium
levels. The
only special requirement for Excelpool
System is to maintain proper levels of salt and
stabilizer. It
is
important to maintain these levels in order to prevent corrosion or
scaling and to ensure maximum enjoyment of the pool. Test your
water periodically. It is recommended that pool
water
be
professionally tested a minimum of twice per
season. Your
local
pool store can provide you with the chemicals and procedures to
adjust the water chemistry. Be sure to tell the pool store that you
are using a salt chlorine generator.
are
using
a
salt
chlorine
generator.
5
|
P
a
g
e
