10
3.5 Setting Operator.
3.5.1 Setting Operator
Format:
15N #
Explanation:
N: the Ext. line No., N=1-8
Description:
To assign any Ext as the operator. In the default setting,
Ext.602 is the operator.
Example:
Setting Ext.602 as operator
In operator mode, this programming doesn’t change the ringing
extension assignment
3.5.2 Fast Dialing Operator
Format:
1 5 2 0 # default setting.
Description:
enable the extensions dialing call-operator code to call the
operator quickly,
Format:
1 5 2 1 #
Description:
disable the extensions to dialing call-operator code to call the
operator quickly.
3.6 Setting Operating mode
The system can be set three operating modes, that is when CO line
incoming call arriving, there will be three modes: operator work mode,
auto-attendant work mode, system CRBT mode
NOTE: All the C.O. lines are in operator mode is the default setting,
the operator ringing Extension is 601 and 602.
3.6.1 Setting Operator Mode for All C.O. Lines
Format:
11#
Description:
Allows all the C.O. lines in Operator mode. In this mode, the
operator extensions and other ringing extensions will ring when an
incoming call is received.
3.6.2 Setting Operator Mode for Certain C.O. line
Format:
11M#
Explanation:
M: C.O. line No.1-No.3
Description:
allows the No.M C.O. line in Operator mode.
Example:
Set C.O. line 1 and 3 in operator mode, other C.O. line in
Auto-attendant mode.
Summary of Contents for MK-208
Page 1: ......
