Excalibur RS-351-EDP Operation Manual Download Page 9

9

The Status Light (cont’d)

5) Flashing Fast (after activating remote start): The system is in the process of start-

ing the engine�

Remote Starting Diagnostics

 

Whenever the system is placed into Valet Mode, the Status Light illuminates 

solid.  However, when this first occurs, the Status Light will flash 1 to 6 flashes be

-

fore resuming solid illumination� This indicates why the engine stopped running from 

the last previous remote starting attempt�

6) 1  Flash = Programmed run time expired� 

7) 2 Flashes = Brake was pressed or hood opened�

8) 3 Flashes = Engine stalled or bad tach signal�

9) 4 Flashes = Received transmitter command to stop�

10) 5 Flashes = Gear selector removed from “park”�

11) 6 FLashes = Low voltage�

Code Jumping

TM

 

Technology

 

  With the proper equipment, it’s quite easy for a criminal to “grab” your transmitter 

code from the air and use it at a later time to gain access to your vehicle contents 

and potentially your home! Code jumping technology uses a complex algorithm to 

change the transmitter’s codes every time a button is pressed� Only the system in 

your car has the key to decipher this code and it is not replicable�

Automatic Transmitter Verification

TM

 

There is also the potential threat of someone, who has temporary access to your 

vehicle, programming their own transmitter to your system� For example, a mechan-

ic, car wash attendant, or valet could do so and gather your personal info from any 

paper work in your vehicle� Then, they could visit your home and help themselves 

to the contents of your vehicle without any signs of intrusion� Many crimes go un-

noticed and people assume they have misplaced their belongings� ATV

TM

 shows you 

how many transmitters are programmed to your system every time you turn on the 

ignition key for a 10 second period� Then, you can easily identify if transmitters have 

been added to your system�

Unauthorized Transmitter alert

TM

 

This feature is a companion to ATV

TM

� With this feature enabled (see “Program-

ming Transmitters” for instructions), UTA

TM

 will warn you with a series of horn honks 

whenever the ignition key is turned “ON”� The warning will occur for a 48 hour period 

and cannot be disabled during that time period (if it could be, then the thief could 

disable it!)� ATV

TM

 also extends to 90 seconds�

Transmitter Protection & Technology

Summary of Contents for RS-351-EDP

















Reviews: