11
Programming Features (cont’d)
~ The horn will honk, the status lights, and the parking lights
will flash equal to the selected setting.
Step 5
If you wish to change more features, repeat steps 3 & 4 at this time�
Step 6
To exit programming, turn the ignition key “ON” then “OFF”� Or, you can wait
10 seconds for programming mode to expire�
Feature #1 Remote Start Run Time
10 Minutes
(press “
lock
” button to program) -
DeFaULT
5 Minutes
(press “
unlock
” button to program)
15 Minutes
(press “
trunk
” button to program)
20 Minutes
(press “
start
” button to program)
This feature sets the period of time that the engine will run after being remotely
started� If the engine is not stopped by controller/transmitter command or a safety
circuit violation, the engine will automatically stop upon the expiration of the selected
time period�
Caution: The remote engine starting feature should neVeR be
used when the vehicle is parked in an enclosed structure or garage�
This group of User Programmable Features are all accessed as a group in the first
level of features’ programming� These features have a direct affect upon the sys-
tem’s operations, so the programming and operation of each are described�
Feature #2 Steady/Flashing Lights During Remote Start
Steady
(press “
lock
” button to program)
- DeFaULT
Flashing
(press “
unlock
” button to program)
This Feature configures the operation of the vehicle’s parking lights during the
remote start operation� The default setting turns on the parking lights during remote
start; the other setting flashes the parking lights on and off during remote start.
User Programmable Features
Feature #3 Confirmation Chirp Function & Volume
Low
(press “
lock
” button to program)
- DeFaULT
High
(press “
unlock
” button to program)
On Demand / High
(press “
trunk
” button to program)
OFF (no chirps)
(press “
start
” button to program)
This feature allows the choice of two different volume levels of the system’s confir
-
mation chirps, you can hear and choose the setting with the best chirp volume as
you select each option� The “On Demand” setting allows you to lock and unlock the
doors without chirps� Similar to OEM keyless entry, pressing either function a 2nd
time, will produce confirmation chirps.
Feature #4 Steady Siren or Pulsed Horn
Pulsed Horn Low
(press “
lock
” button to program)
- DeFaULT
Pulsed Horn Medium
(press “
unlock
” button to program)
Pulsed Horn High
(press “
trunk
” button to program)
Steady Siren
(press “
start
” button to program)
This feature changes only the audible output, in three different pulse timings, which
allow a degree of customizing of the horn’s sound during panic mode� The Steady
Siren setting is exactly that- a steady output for an optional electronic siren�
