12
User Programmable Features (cont’d)
Feature #6 Doors Unlock with Ignition Off
Off
(press “unlock” button to program)
- DEFAULT
On
(press “lock” button to program)
Similar to the previous locking feature, except this feature controls the unlock opera-
tion when the ignition is turned off.
This group of Installer Programmable Features are all accessed as a group in the
second level of features’ programming. These features have a direct affect upon the
system’s operations related to the installation and vehicle type
AND SHOULD ONLY
BE CHANGED BY THE INSTALLER!!!
Feature #1 Remote Start Activation
1 button presses
(press “lock” button to program)
2 button presses
(press “unlock” button to program)
- DEFAULT
3 button presses
(press “trunk” button to program)
4 button presses
(press “start” button to program)
This feature allows you to choose the number of button presses AnD pulses
required on the white/Blue activation wire to activate the remote start feature. All of
the settings must occur within a 5 second window of the previous pulse.
Installer Programmable Features
Feature #2 PINK/wHITE (IGN #2) wire operation
Ignition
(press “lock” button to program)
- DEFAULT
Accessory
(press “unlock” button to program)
Start
(press “trunk” button to program)
Ignition
- operates with the same timing as the PInK ignition #1 output.
Accessory
- operates with the same timing as the ORAnGE accessory output.
Start
- operates with the same timing as the VIOLET start output
Feature #7 Doors Unlock with Trunk Release
Off
(press “unlock” button to program)
On
(press “lock” button to program)
- DEFAULT
when trunk release (CH2) is activated, this feature determines whether the doors
will unlock or not.
Feature #3 Engine Detection Method
Tachless Hi
(press “lock” button to program)
- DEFAULT
Tachless Lo
(press “unlock” button to program)
Tach wire
(press “trunk” button to program)
Data Tach
(press “start” button to program)
Crank Only
(press “lock” & “unlock” to program)
“Tachless Hi”
sensitivity mode looks for a voltage increase of 0.3v after cranking. It
uses a fixed crank time determined by installer feature #5.
“Tachless Lo”
sensitivity mode looks for a voltage increase of 0.5v after cranking. It
uses a fixed crank time determined by installer feature #5.
