background image

2

Table Of Contents

Introduction ���������������������������������������������������������������������������������������������� 3

The Transmitter���������������������������������������������������������������������������������������� 4

Transmitter Functions Reference Guide ����������������������������������������������� 4

Other Remote Start Features������������������������������������������������������������������ 7

Low Battery/Low Temp Automatic Starting �������������������������������������������� 7

Turbo Timer Feature ������������������������������������������������������������������������������ 7

Pit-Stop Feature ������������������������������������������������������������������������������������ 7

Manual Transmission Starting ��������������������������������������������������������������� 7

Using The Valet Switch ��������������������������������������������������������������������������� 8

The Status Light �������������������������������������������������������������������������������������� 8

Programming Transmitters������������������������������������������������������������������� 10

Programming Features ������������������������������������������������������������������������� 10

User Programmable Features �������������������������������������������������������������� 11

Installer Programmable Features��������������������������������������������������������� 12

Programmable Features Matrix ������������������������������������������������������������ 15

This device complies with FCC Rules part 15� Operation is subject to 

the following two conditions, (1) This device may not cause harmful 

interference and, (2) This device must accept any interference that 

may be received, including interference that may cause undesired 

operation�

The manufacturer is not responsible for any radio or TV interference 

caused by unauthorized modifications to this equipment. Such modifi

-

cations could void the user’s authority to operate the equipment.

Summary of Contents for RS-330-EDP

















Reviews: