5
Controlling The System (cont’d)
TRUNK RELEASE/ CHANNEL 2:
Press and hold the
“TRUnK” button for 3 seconds�
THE TRUnK wILL OPEn, THE DOORS wILL
•
UnLOCK, THE PARKIng LIgHTS wILL FLASH TwICE
THEn ILLUMInATE FOR 30 SECOnDS, AnD THE
HORn wILL HOnK TwICE�
SILENT LOCK/UNLOCK
•
: PRESS THIS BUTTOn
TwICE wITHIn 5 SECOnDS TO LOCK OR UnLOCK
THE DOORS wITHOUT HORn HOnKS�
REMOTE START:
Press and release the “START” button
twice� (see installer feature #1 for other options)
THE PARKIng LIgHTS wILL FLASH AnD THE
•
STATUS LIgHTS wILL FLASH RAPIDLy�
THE IgnITIOn wILL TURn On AnD THE SySTEM
•
wILL START THE EngInE�
wHEn THE EngInE IS RUnnIng, THE STATUS
•
LIgHTS wILL FLASH SLOw AnD THE PARKIng
LIgHTS wILL STAy On AS LOng AS REMOTE START
MODE IS ACTIVE�
If the engine stalls, the system will make up to 3 more attempts�
•
Each time you park your vehicle, set the climate controls to give
•
you the desired interior temperature when you use the remote start�
The engine will run for the preset run time (see user feature #1)�
•
Run Time Extender
•
: Press the “START” button one time while in
remote start mode to restart the engine run timer�
NOTE: This can only be used once per remote start cycle� If the system has
an ECHO 2-way upgrade, you will get “run time expiration” warning chirps 1
minute before the timer ends�
If you decide not to drive your vehicle, you can turn off the remote
•
start using the same method to turn it on (keep in mind that the first
press is considered the
Run Time Extender
)�
Upon entering the vehicle during remote start mode, turn the igni-
•
tion key to the “On/RUn” position (
NOT START!!
)� when you press
the brake pedal, the remote start will turn off�
