IC 906 Operating Instruction
Initialization
Load 3 pcs AA alkaline batteries into the battery holder of the rear panel, and insert the plug
of the back panel into the socket of the front panel, and use a needle tool to press the Reset
button until three long “beeps” sound, and the lock is initialized. After initialization, all the
programmed cards and digital codes are deleted.
(When the locks leave the factory, the locks are already initialized)
I
.
Owner Card (1 pc)
Program Owner Card:
After initialization, scan the Dirst EM card near the inductive area, after three long beeps
sound, the card is the Owner card.
Change Owner Card:
Press the Reset button until three long beeps sound, all the programmed card(s) and digital
codes are deleted, scan another EM card near the inductive area, after three long beeps
sound, the card is the new Owner card.
Note:
a.The owner card is used to program or delete master card(s) and master code, and
cannot be used to lock or unlock.
Ilockey Technology Co.,lTD
Focused on smart lock solution
