Page - 45
2a) The Personal Coded Override must be entered before 15 seconds expires. Press the Valet
Switch the correct number of times - the factory-set default is one press for stage #1 and
no press for stage #2. If the system is configured with the default setting, it will respond
by sounding the siren for a short period, then two chirps (or one long then two short
horn honks). In this case proceed to Step 3.
2b) If the system has had the Personal Coded Override custom-programmed, once stage #1
been properly entered (which can be up to nine Valet Switch presses) the system will
acknowledge the entry by sounding the siren (or horn) for a short period, then one chirp
(or a short honk). You now have 8.5 seconds to initiate stage #2 of entering the Override
Code. Momentarily press the Valet Switch equal to the Override Code number
programmed for stage #2. The system will acknowledge the entry by sounding the siren
for a short burst and two chirps (or the horn will sound one long, then two short honks).
3)To learn the first transmitter code, press the large transmitter button, (which will arm/disarm/
panic the system), until you hear one long and one short siren chirp (or horn honk) to confirm
that the code was learned. The two small button's functions will automatically
be learned at the same time. When the first transmitter code is learned, all other prior codes
will be erased.
4)To program the second, third or fourth transmitter codes, repeat step 3. As each transmitter
is learned, the long confirmation siren chirp (or horn honk) will be followed
Page - 46
by two short chirps (or honks) for transmitter number two, three short chirps (or honks) for
transmitter number three, and four short chirps (or honks) for transmitter number four. An
attempt to add any further transmitter codes will be ignored.
5)Turning off the ignition switch or 10 seconds of no programming will automatically turn off
the transmitter learning code program, which is confirmed by two long siren chirps (or horn
honks).
Whenever a transmitter is coded into the security system, whether an existing one or
previously unknown transmitter, the siren will chirp (or horn will honk) for two seconds every
time the ignition is turned "on", for a period of 48 hours. Additionally, the Visual Deterrent
LED will flash and the Digital Status Indicator will show the number of transmitters which can
operate the system for 90 seconds instead of 10 seconds. This
operation is the Automatic Transmitter Verification
TM
feature, which protects the system from
someone programming an unauthorized transmitter to operate the system.
Remember, up to four different security systems may be operated by each transmitter by
taking advantage of its ability to change banks, as described on pages 11-12.
Page - 47
MO_EG-1600ATV.2
This device complies with FCC Rules part 15. Operation is subject to the following two
conditions, (1) This device may not cause harmful interference and, (2) This device must
accept any interference that may be received, including interference that may cause undesired
operation.
The manufacturer is not responsible for any radio or TV interference caused by unauthorized
modifications to this equipment. Such modifications could void the user's authority to operate
the equipment.
L I M I T E D L I F E T I M E W A R R A N T Y
Products manufactured and sold by OMEGA RESEARCH & DEVELOPMENT, INC. (the Company), are
warranted to be free from defects in materials and workmanship under normal use. If a product sold by the Company
proves to be defective, the Company will repair or replace it free of charge within the first year and thereafter all parts
to be repaired will be free with only a nominal charge for Omega Research and Development, Inc.'s labor and return
shipping, to the original owner during the lifetime of the car in which it was originally installed.
All products for warranty repair must be sent postage prepaid to Omega Research & Development, Inc., P.O.
Box 508, Douglasville, Georgia 30133, with bill of sale or other dated proof of purchase. This warranty is nontransferable
and does not apply to any product damaged by accident, physical or electrical misuse or abuse, improper installation,
alteration, any use contrary to its intended function, unauthorized service, fire, flood, lightning, or other acts of God.
This warranty limits the Company's liability to the repair or replacement of the product. The Company shall
not be responsible for removal and/or reinstallation charges, damage to or theft of the vehicle or its contents, or any
incidental or consequential damages caused by any failure or alleged failure of the product to function properly. Under
No Circumstances Should This Warranty, Or The Product Covered By It, Be Construed As A Guarantee Or Insurance
Policy Against Loss. The Company neither assumes nor authorizes any person or organization to make any Warranties
or assume any liability in connection with the sale, installation, or use of this product.
