Page - 17
cycles. The system will stop after a total of 3 minutes and rearm automatically, while ignoring
only the open entry or triggered circuit. When the entry is closed, protection will begin
instantly for that circuit.
After the security system has been activated, the disarm confirmation will no longer be 2
siren chirps (or horn honks), and the parking lights staying on. Instead, the system will respond
by producing 4 siren chirps (or horn honks) and the parking lights and dome lights will flash
4 times before staying on for 30 seconds. The Digital Status Indicator will first flash a number,
then letter, which indicates the protected zone which was violated and number of violations.
If more than one zone was violated, all be flashed in sequence. The Visual Deterrent LED will
also change to flashing two to five times, then pausing 1 second to indicate which protected
zone triggered the system. The Digital Status Indicator and Visual Deterrent LED will continue
flashing this Zone Violation Code until the ignition switch is turned “on”, which clears the
system's Visual Deterrent LED memory circuit. Please see Pages 22-26 for the violation codes.
While the security system is in the armed state, pressing and releasing the large transmitter
button once will instantly disarm the system and unlock the doors. Disarming is confirmed
by the siren chirping twice (or horn honking twice), and the parking and interior lights turning
on for 30 seconds. However, the lights will turn off instantly if the ignition switch is turned
"on". If the system was triggered while you are away, the disarm confirmation will change to
4 horn honks (or siren chirps), 4 light flashes, and then
Disarming The System Using The Transmitter
the lights will stay on for 30 seconds, to illuminate the way to your vehicle. The security
system will have this response upon disarming until the ignition switch is turned "on", which
clears the unit's memory. Anytime the security system triggers, the Visual Deterrent LED
and the Digital Status Indicator will indicate which zone triggered the system, which explained
on Pages 22-26.
Your Excalibur Gold vehicle security system offers a very high level of personal safety and
convenience with the advanced features utilized upon disarming. The ability to know instantly
if your system was triggered while you were away, and the exterior and interior light illumination
allows you a lighted approach to your vehicle with the ability to examine the interior before
entering. If you wish, you can program the system to turn on the exterior and interior lights
for five seconds instead of thirty seconds upon disarming. Disarming the security system
without the use of the remote transmitter, please see the following section.
Valet Mode is a condition, or state, in which the security system may be placed to prevent
certain functions from occurring, especially any automatic functions such as Last Door
Arming. An Override is an alternative method of disarming an armed and activated system.
Therefore, there are two separate and distinct methods to obtain these functions: first is Easy
Valet
TM
Mode, whereby a disarmed system may be placed into Valet Mode without the ignition
key, and the second is Personal Coded Override Mode, which will disarm an armed or activated
system and requires the use of the ignition key.
Page - 18
Easy Valet
TM
& Personal Coded Override
Page - 19
The Valet Switch is on the Information and Programming Module.
Easy Valet
TM
Mode: This unique feature can be utilized anytime the security system is in
the disarmed condition. If your Excalibur Gold system is programmed to perform any automatic
features, such as Last Door Arming, you will find Easy Valet
TM
Mode useful when stopping
for fuel, having your vehicle serviced, having it valet parked, etc. Easy Valet
TM
Mode is unique
because other security systems require the ignition switch to be "on" to enter Valet Mode,
but with this system, the ignition can be either "on" or "off", so the ignition key is not required.
Whenever the security system is disarmed, simply depress the Valet Switch for two
seconds to achieve the Easy Valet
TM
Mode. The system will confirm it is in the Easy Valet
TM
Mode with two siren chirps (or two horn honks). The Digital Status Indicator will show
" " for 30 seconds and the Visual Deterrent LED will illuminate steady. To remind you that
the system is in Easy Valet
TM
Mode, every time the ignition switch is turned "off" the siren
will chirp once (or the horn will honk once). The system will hold memory of the Easy Valet
TM
Mode condition while the ignition is "on" or "off", or even if power is removed from the system.
While in the Easy Valet Mode
TM
, the transmitters can still operate the Panic Feature, the
power doorlock operation, or optional trunk release. Additionally, the doors will lock when
the ignition is turned "on" and unlock when turned "off"', if this programmable feature is
utilized. To exit the Easy Valet
TM
Mode, simply momentarily press the Valet Switch. The
security system will instantly revert to the disarmed condition. To confirm that Valet Mode
has been exited, the Information and Programming Module and Digital Status Indicator will
turn off. Remember, Easy Valet
TM
Mode only operates when the security system is in a disarmed
state - an armed condition requires using the Personal Coded Override, which may be custom
programmed to be operable only by yourself.
Personal Coded Override - How To Disarm The System Without Using The Transmitter:
In the event the transmitter is lost, damaged, or otherwise inoperable, the Valet Switch and your
ignition key may be used to disarm the system. This is Personal Coded Override, and you may
custom program its operation for convenience, or, a higher level of security. As set at the
factory, Personal Coded Override operates in the following fashion:
1)
If the security system is armed, and the transmitter not available or operable, have
the ignition key ready and enter the vehicle - be prepared for the system to trigger
when the door is opened.
2)
Turn the ignition switch "on", and within 5 seconds press and release the Valet
Switch once.
The system will instantly disarm.
Personal Coded Override can offer a higher level of security if desired because, in addition
to the ignition key, you may configure a second "stage" to the procedure, and even program
a preset number of Valet Switch presses for each stage. Please see Page 31-32 for further
programming and operational details of this Feature.
Page - 20
