12
Using The Valet Switch
VALET MODE
Valet mode completely disables all security & remote start functions� Keyless entry
is still operable� To enter valet mode, perform the following steps:
STEP 1 -
Disarm the system by remote or by performing an emergency override�
STEP 2 -
Press and hold the valet switch for 2 seconds� The system will chirp once
and the status light will turn on�
EXITING VALET MODE
- Press and release the valet switch once� The status light
will turn off�
EMERGENCY OVERRIDE
If you were to lose or break your controller, you’d need to perform an emergency
override to disarm the system and use your vehicle� To do so, use the following steps:
STEP 1 -
Enter the vehicle (the alarm should sound)�
STEP 2 -
Turn the ignition key to the “ON” position�
STEP 3 -
Press the valet switch (located in the window-mount antenna) once�
NOTE: Enter your SecureCode at this time if programmed via user feature #13
STEP 4 -
Turn the ignition key “OFF”�
