background image

11

WHEN THE SYSTEM TRIGGERS

  If the system were to be compromised while armed, it will trigger sounding the 

siren/horn and flashing the parking lights for 30 seconds (programmable). At this point 

you will also be notified on the controller as to which zone is violated (if in range of the 

system)� When disarming the system after a trigger event, the siren/horn will chirp 4 

times and the parking lights will flash 4 times instead of the standard 2 times.

LOCK ON TRIGGER:

 If a door is opened when the system is triggered, it will wait 

until the door is closed again, then lock the doors� This patented feature is useful to 

further deny a thief of further access to the vehicle�

STORM SAFE MODE:

 When the system is triggered, pressing the “UNLOCK” button 

will stop the alarm from sounding but will leave the doors locked� This function is use-

ful if you have a false triggering situation due to violent weather�

ZONE VIOLATION RECALL:

 The system is capable of telling you which zones were 

triggered last� In addition to the controller’s trigger history log (discussed later in this 

manual), the system’s status light will flash to indicate which zone was triggered. This 

occurs during the alarm cycle AND after disarming� The system will store the last trig-

gered zone until the vehicle’s ignition key is turned on. See “The Status Light” section 

of this manual for further explanation of this feature.

NUISANCE PREVENTION:

 If the system prewarns 5 times within 15 minutes, it will 

bypass the zone for the remainder of the 15 minutes before rearming the pre-warn 

zone. Additionally, if a full trigger zone is left open, the system will trigger a total of 3 

times before bypassing the zone. Once the zone is closed again, it will re-arm that 

zone.

Security System Features (cont’d)

Summary of Contents for AL-2060-EDPB





























Reviews: