background image

3

Introduction

  Congratulations for choosing one of the most versatile, fully-featured vehicle secu-

rity and convenience systems available today� Omega Research & Development has 

been a leader in vehicle security products for nearly 4 decades� Please take the time 

to read this manual thoroughly so you can fully enjoy the benefits and features this 

system offers�

  In this manual, you will primarily learn about 5 user interface components and how 

they work together in alerting you to system changes as well as how you can control 

system operations� Keep in mind that the operations described in this manual are writ-

ten to only reflect the default system settings. Be sure to discuss any customization 

with your installer so you can remember any variations from this guide�

 

Controllers:

 The system has a 2-way controller that, in addition to controlling the 

system, it will give you confirmations on system operations as well as violation alerts. 

A 1-way transmitter is also included� It is a standard remote control that still gives 

you control over all features but without confirmations. The next section covers the 

controllers’ operations in detail�

 

The Status Lights:

 These lights are built into the system’s window-mounted 

antenna� They give you a visual indication of the system’s current state and provide 

troubleshooting indicators� The operations of the status lights are covered later in this 

manual�

 

The Valet Switch:

 This push button gives you access to system programming, 

transmitter/controller programming, and valet functions� It is also built into the sys-

tem’s window-mounted antenna� The valet switch’s operations are also covered later 

in this manual�

 

Flashing Lights:

 The system is connected to your vehicle’s parking lights to 

provide a 360 degree visual confirmation, warning, & deterrence in almost all system 

operations� Each operation described in this manual also includes the corresponding 

indicator from the flashing lights. The flashing lights primarily provide visual deter

-

rence when the system is violated� 

 

Siren and/or Horn Sounding:

 The system includes an electronic siren that offers 

confirmation chirps during daily operations and programming. It is also the primary 

means of alerting anyone near your vehicle that the system has been violated� The 

system is capable of sounding the vehicle’s horn in addition to, or in place of, the 

electronic siren� Most system functions have a corresponding audible alert that is 

described throughout this manual� Becoming familiar with these alerts will help you to 

instantly understand any changes in the system’s status�

Summary of Contents for AL-1950-EDPB





























Reviews: