Excalibur AL-1950-EDPB, Operation Manual

Page: 5 / 28

5
Controller & Transmitter Overview (cont’d)
“ lock ”
button
“ trunk ”
button
“ unlock ”
button
“ start ”
button
AL-1950-EDPB part number: 148-03
AL-2050-EDPB part number: 1410-03
Call your dealer or visit www.caralarm.com to
order replacement transmitters.
Transmitter battery replacement:
Remove the small screw from the lower
back case, and separate the transmitter
halves� Replace the battery(ies) and reas-
semble the transmitter case�
Battery Types:
148-03 - CR2016 (2 required)
1410-03 - CR3032 (1 required)
THE 1-WAy TRAnSmITTER
Controller & Transmitter Functions
LOCK / ARm: Press and release the “LOCK” button�
ThE SIREN WILL ChIRP & ThE PARKINg LIghTS WILL •
FLASh ONCE�
UPON RECEIVINg CONFIRMATION FROM YOUR •
SYSTEM, ThE CONTROLLER WILL PLAY ThE LOCK/ARM
ANIMATION AND BEEP ONCE
nOTE: PRESSInG LOCK TWICE In 5 SECOnDS STARTS
THE PARKInG TImER. THE CLOCK WILL CHAnGE TO
0:00 AnD START COunTInG In mInuTES & HOuRS.
(1-way transmitter: press the loCk button)
unLOCK / DISARm: Press and release the “UNLOCK” button�
ThE SIREN WILL ChIRP TWICE & ThE PARKINg •
LIghTS WILL FLASh TWICE ThEN ILLUMINATE FOR 30
SECONDS�
UPON RECEIVINg CONFIRMATION FROM YOUR •
SYSTEM, ThE CONTROLLER WILL PLAY ThE UNLOCK/
DISARM ANIMATION AND BEEP TWICE�
(1-way transmitter: press the unloCk button)
nOTE: The 2-way Controller is shipped from the factory in POWER OFF mode.
If you connect the charger before powering it, perform POWER OFF, then
POWER On again.
POWER On: Press and hold the “P” button for at least 1 second
POWER OFF: Press the “P” and “ “ buttons for at least 1 second
*
1410-03 Pictured