background image

Step 6: 
On the Iron Filter - Sulphur Filter next setting will have an arrow 
pointing to the SET on the top left with another arrow pointing to the 
fill.  This is a fill cycle which is not required on the Value Iron Filter - 
Sulphur Filter and should be set to “OFF”.  Press the Value Iron Filter 
- Sulphur Filter next button to go to exit and return to time. 
 

Excalibur Water Systems Iron Filter - Sulphur Filter 

Programming Procedures: 

 
General Operation: 
When the Value Iron Filter - Sulphur Filter is filtering on two displays 
of the Value Iron Filter - Sulphur Filter two displays will be shown, 
time of day or days until the next regeneration of the Value Iron Filter 
- Sulphur Filter.  When pressing up or down on the Value Iron Filter - 
Sulphur Filter will toggle between the two choices. 
 
 
To set time of day: 
When the Value Iron Filter - Sulphur Filter has a power outage longer 
than 8 hours or a power surge the time of day will flash indicating it 
requires to be reset.  All other information for the Value Iron Filter - 
Sulphur Filter will be stored in memory no matter how long the Value 
Iron Filter - Sulphur Filter has a power outage.  To set the time of day 
push and hold the 

arrow until the SET indicator is displayed, 

and the house flashes.  Press the Value Iron Filter - Sulphur Filter 

button until the correct hour of day is displayed.  Press the 

next button and the minutes to be set will flash.  Use the 

 

button to correctly set the minutes to the proper time of day.  Press 
the Value Iron Filter - Sulphur Filter next button to return to the main 
screen. 
 
The user can initiate manual regeneration of the Value Iron Filter - 
Sulphur Filter Filter.  The user has the option to request Value Iron 
Filter - Sulphur Filter to have manual at the delayed regeneration time 
for the Value Iron Filter - Sulphur Filter or have the regeneration 
occur immediately for the Value Iron Filter - Sulphur Filter.  On the 
Value Iron Filter - Sulphur Filter simultaneously press the up and 
down buttons on the Value Iron Filter - Sulphur Filter to start 
regeneration at the next delayed regeneration time.  If the Value Iron 

Summary of Contents for Value Iron Filter - Sulphur Filter











Reviews: