Programming Set Up Iron Filter - Sulphur Filter Filters
On the Value Iron Filter - Sulphur Filter press next and
buttons
simultaneously for 3 seconds and release to take go to the Value Iron
Filter - Sulphur Filter regeneration and cycle times set up screens.
Step 1:
The first Value Iron Filter - Sulphur Filter set up stage will have a
arrow pointing to the SET on the top left and the display on the digital
board should read “Soft”. Press the Value Iron Filter - Sulphur Filter
next button to go to step 2.
Step 2:
On the Value Iron Filter - Sulphur Filter next setting will have an arrow
pointing to the SET at the top left with another arrow pointing to Value
Iron Filter - Sulphur Filter backwash. This cycle time is to be set for
10 minutes. Press the Value Iron Filter - Sulphur Filter next button for
step 3.
Step 3:
On the Iron Filter - Sulphur Filter next setting will have an arrow
pointing to the SET on the top left with another arrow pointing to the
Value Iron Filter - Sulphur Filter Draw. This cycle time is to be set for
40 minutes. Press the next button to go to step 4.
Step 4:
On the Iron Filter - Sulphur Filter next setting will have an arrow
pointing to the SET on the top left with another arrow pointing to the
backwash. This is a second backwash which is not required on the
Iron Filter - Sulphur Filter filter and should be set to “OFF”. Press the
next button to go to step 5.
Step 5:
On the Iron Filter - Sulphur Filter next setting will have an arrow
pointing to the SET on the top left with another arrow pointing to the
rinse. This is a rinse cycle which is not required on the Iron Filter -
Sulphur Filter filter and should be set to “OFF”. Press the next button
to go to step 6.
