XRT83SL38/L38EVAL User Manual
Page 15 of 23
The File pull-down Menu
Figure 15 presents an illustration of the “Start-Up” window with the “File” pull-down menu fully
visible.
Figure 15, Illustration of the “File” Pull-down Menu
Figure 15 indicates that the “File” pull-down menu contains the following options:
“Port”
“Exit”
Each of these options are discussed in detail below
Port Setup
The “Port Setup” option permits the user to select the address where the parallel port is located.
The default address is 0x378. A check mark indicates which address it is currently set to.
Note: This section DOES NOT change your system configurations for the parallel port. This
option is needed ONLY when the address to your system’s parallel port is not set at 0x378.
Exit
The “Exit” option permits the user to “gracefully” terminate and exit the program.
