3 Installation
Read the chapter on safety. Check before installation if the parts are all present
and undamaged. In case of errors, contact your vendor.
3.1 Preparation
The complete wiper, with packaging, can be handled and transported by hand.
Leave the wiper in the packing, until you are ready to install it; this to reduce
the risk of damage. Make sure all parts, tools and other means are ready.
3.2 Installation of mechanical parts
1. If your wiper is supplied with the wipe arc disc uninstalled, please follow
steps described in paragraphs 5.3 and 5.4 to set the wiping arc prior to
installation.
Determine the place where the wiper is to be installed. The dimensions are
shown below. The wiper can be installed in any position.
7
