manualshive.com logo in svg

Exalt EX-5i Lite, Installation & Management

Share
Download
Exalt EX-5i Lite Installation & Management Download Page 7

Exalt Communications Inc. 

EX-5i Installation & Management 

Page vi 

5000005 
2006-05-17 

•

 

A properly licensed or authorized electrician should be employed to install or 
evaluate/certify the installation of all power and grounding related to the use of this 
equipment and all connected devices. 

•

 

The device(s) shall only be connected to AC power sources provided by the supplier or to 
DC sources within the device’s specifications. A separate breaker circuit shall be 
employed at the power source. 

•

 

Lightning, surge protection devices and earth grounding are required for most 
installations to ensure human safety. Consult your qualified electrician. 

•

 

Servicing of this device should be performed by authorized personnel only. Do not 
disassemble this device. By opening or removing any covers you may expose yourself to 
hazardous energy parts. Incorrect reassembly of this product can cause a malfunction, 
and/or electrical shock, when the unit is subsequently used. 

•

 

Do not connect or disconnect the power connection to the device when the power supply 
is plugged into an AC outlet. To connect, first connect the power connection to the 
device, then apply power (or plug in) at the outlet. To disconnect, disengage power at the 
outlet or unplug, then disconnect the direct connection to the device. 

•

 

Do not insert any object of any shape or size inside this product at any time, whether 
powered or not. Objects may contact hazardous energy parts that could result in a risk of 
fire or personal injury. 

•

 

Liquids shall not come in contact with, or enter the inside of the device at any time. 

•

 

Proper ventilation and/or airflow shall be provided surrounding the equipment. Do not 
block any intake or exhaust vents. Items shall not come in contact with heat-sinking 
materials. Assure that ambient operational and storage temperature specifications are 
maintained at all times. 

•

 

Equipment is suitable for mounting on noncombustible surfaces only. 

•

 

Do not move or alter the marking labels. 

Open-Source License Information 

 

In addition to proprietary software/firmware, which is the sole intellectual property of Exalt, the 
EX-5i Digital Microwave Radio makes use of public (open-source) software/firmware (such as 
Linux OS) within the terms of use of their respective shared license agreements. Interested 
parties may contact Exalt Communications for copies of specific license agreements for any 
open-source software/firmware utilized in this product. 

Summary of Contents for EX-5i Lite























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands