Exalt Communications, Inc.
EX-5i Installation & Management
5000005
13
2006-05-17
To use the Hardware Temporary Configuration Key, follow these steps:
1.
Remove power from the radio
2.
Remove anything connected to the ALARMS port
3.
Connect the key (found in the accessory kit) to the ALARMS port
4.
Hold down RMT button while applying power. Continue to hold…
5.
The LEDs will toggle through the boot cycle. Continue to hold the RMT button through
the boot cycle, until LEDs stabilize (approximately 45 seconds)
6.
Release the RMT button when LEDs stabilize
The following configurations are changed on the radio:
•
IP address = 10.0.0.1
•
IP mask = 255.0.0.0
•
IP gateway = 0.0.0.0
•
Administration password = admin
•
User password = user
•
Endpoint Identifier = Radio A
