Manual Pauline TH-PROJ-UNI
Version 1.2
02.01.2020
Page 13 of 16
5. Mounting the PAULINE ceiling mount to a truss
To hang the ceiling mount on a truss one must use the attached C-clamp. Always
use both M12 nuts to make sure the clamp cannot loosen itself.
Make sure the quick snap is locked, otherwise the lower part of the ceiling mount
including the projector can fall off.
Note: Always secure the ceiling mount using appropriate safety steel cables.
Make sure they are chosen correctly regarding strength, format and length.
Please avoid high dynamic forces by ensuring that the mounting clamp will not
drop more than
5cm
into the safety. You can place the safety steel cable
between the ceiling mount and the projector.
Please consult the local laws or regulations regarding the additional safety of
hanging equipment.