Manual Pauline TH-PROJ-UNI
Version 1.2
02.01.2020
Page 10 of 16
Step 2: Place the RippLOCK Safety Washers (2) over each corresponding hole.
Secure the screws (1) into each hole. Ensure each screw runs through the plate
and catches into the corresponding thread in the projector surface.
Depending on the projector you are using, you can use up to five screws to
mount the PAULINE on the projector.
Do not forget to use the RippLOCK Safety Washers (2) as they are
preventing the screws to loosen themselves!
Do only use screws, which match the threads in the projector!
Step 3: Make sure to tighten all three screws of each arm after you finished
adjusting them.
