11
SERVICE
SERVICE AND REPAIRS
All quality tools will eventually require servicing or replacement of parts due
to wear from normal use. For assistance with your tool, visit our website at
www.devap.com
for a list of service centers or call the Customer Care
Department at 1-800-888-2468. All repairs made by our service centers are
fully guaranteed against defective material and workmanship. We cannot
guarantee repairs made or attempted by others.
Should you have any questions about your tool, feel free to write us at any
time. In any communications, please give all information shown on the
nameplate of your tool (model number, type, serial number, etc.).
Disconnect tool from air supply before performing any Service
Procedure.
SYMPTOM PROBLEMS
SOLUTIONS
1. Air leak near top of
Loose screws.
Tighten screws.
tool or in trigger area.
Worn or damaged
Install Overhaul Kit.
o-rings or seals.
2. Tool does nothing or
Inadequate air supply.
Verify adequate air supply.
operates sluggishly.
Inadequate lubrication.
Put 5 or 6 drops of oil into air inlet.
Worn or damaged
Install Overhaul Kit.
o-rings or seals.
3. Air leak near bottom
Loose screws.
Tighten screws.
of tool.
Worn or damaged
Install Overhaul Kit.
o-rings or bumper.
4. Tool jams frequently.
Incorrect fasteners.
Verify approved fasteners of
correct size.
Damaged fasteners.
Replace w/undamaged fasteners.
Magazine or nose
Tighten screws.
screws loose.
Magazine is dirty.
Clean magazine.
Driver is worn or damaged.
Install “DRIVER” Maintenance Kit.
5. Other.
Contact the Customer Care
Department at 1-800-888-2468.
TROUBLESHOOTING GUIDE
