NL
FR
EN
26
NB These symbols on your device
mean:
• This appliance is filled with Pro-
pane gas R290. Follow strictly the
manufacturer’s instruction con-
cerning use and repairs!
• Before using this appliance, you
must carefully read the entire in-
struction manual.
• Do not install, operate or store
the device in a room with a floor
area smaller than 4m
2
for 10L/12L
models, and 7m
2
for 14L models.
• Repairs must be performed based
on the recommendations from the
manufacturing company.
SPECIFIC SAFETY NOTES RELAT-
ING TO REFRIGERANT R290:
• ENVIRONMENTAL
INFORMA-
TION: This unit contains fluorinat-
ed greenhouse gas covered by the
Kyoto Protocol.
• This appliance contains the refrig-
erant R290.
• R290 is a refrigerant that complies
with European ecological stand-
ards; nevertheless, it is recom-
mended not to pierce the cooling
circuit of the machine. At the end
of its useful life, deliver the appli-
ance to a special waste collection
centre for disposal.
• GWP (Global Warming Potential)
R290 = 3.
• If the appliance is installed, oper-
ated or stored in a non-ventilated
area, the room must be designed
to prevent the accumulation of re-
frigerant leaks resulting in a risk of
fire or explosion due to ignition of
the refrigerant caused by electric
heaters, stoves or other sources
of ignition.
• When defrosting and cleaning the
appliance, do not use any tools
other than those recommended by
the manufacturing company.
• The appliance must be placed in
an area without any continuous
sources of ignition(for example:
open flames, gas or electrical ap-
pliances in operation).
• Do not pierce or burn any of the
components of the cooling circuit
of the unit. Do not set light to the
unit.
• The appliance must be stored in
SAFETY ADVICE
such a way as to prevent mechan
ical failure ordamage.
• Appliance must be installed, op
erated and stored in a room with
a
10L/12L
room
14Lmodels.
size
• Be aware that the refrigerant
gases may be odourless, which
means you cannot smell leaks.
• Compliance with national gas reg
ulations must be observed.
• Individuals who operate or work
on the refrigerant circuit must
have
issued by an accredited organisa
tion that ensures competence in
handling refrigerants according to
a
by national associations in the in
dustry.
• Maintenance and repairs that
require the assistance of other
qualified
formed under the supervision of
an
inthe
ants. Keep ventilation openings
clear of obstruction.
Manual_Snowair7C-9C-9CP-12C-12CP_2021.indd 26
Manual_Snowair7C-9C-9CP-12C-12CP_2021.indd 26
25/01/21 11:33
25/01/21 11:33