Assembly Instructions
Unpack the heater making sure that all the items
are present, that there are no components left in
the box and that the heater head is free from any
packing material. The heater must be handled
with care to avoid any damage.
Do not connect the heater to electrical supply
if any of the components or the power cord is
damaged in any way.
Step 1
Fix the base to the heater pole using the 3 pcs
M8 * 25 mm screws provided. Tighten screws
by hand using the allen key provided, see Fig 2.
Step 2
Fix the table top to the heater pole using the
4 pcs M6 * 12 mm screws provided. Tighten
screws by hand using the allen key provided,
see fig 3.
Operation
Connect the power cord to a 13 amp supply
that is located in a safe dry area. The switch on
the heater is used to control the operation of
the heater. The (I) position for 1,500 W and the
position (0) is off, see Fig 1. The unit must be
securely grounded during operation.
Although the heater is shower proof, do not
use when raining or in wet conditions. Always
disconnect the power cord from the electrical
supply when the patio heater is not in use.
Care and Maintenance
The head of the heater is at a high temperature
during operation. Disconnect the heater from
the electrical supply and wait until it cools before
cleaning.
Clean the outside of the heater with a damp
cloth. Never use corrosive or solvent cleaners
or immerse in water.
Any maintenance or repairs including replacement
of the halogen tube should only be carried out
by a qualified electrician or by a recommended
service centre.
Recycling
For electrical products sold within
the European Community. At the
end of the electrical products useful
life it should not be disposed of with
household waste. Please recycle
where facilities exist. Check with
your Local Authority or retailer for
recycling advice in your country.
After Sales Service
Should you require after sales service, please
contact the retailer from whom the appliance
was purchased or contact the service number
relevant to your country on the warranty card.
Please do not return a faulty product to us in the
first instance as this may result in loss or damage
and delay in providing you with a satisfactory
service.
Please retain your receipt as proof of purchase.
Model Identifier(s):
Clima 800S
Heat output
Nominal heat output
Pnom
1.5
kW
Minimum heat output (indicative)
Pmin
1.5
kW
Maximum continuous heat output Pmax,c
1.5
kW
Auxiliary electricity Consumption
At nominal heat output
elmax
0.0
kW
At minimum heat output
elmin
0.0
kW
In standby mode
elSB
0.0
kW
Type of heat output/ room temperature control
Single stage heat output and no room temperature control
Yes
Contact details
GDHVI
Dunleer,
Co. Louth,
Ireland
