Design and function
TIG Synergic operating principle
62
099-000115-EW501
17.06.2015
5.13.3 Select welding task
The welding task is selected using the buttons on the machine control on the welding machine.
Signal lights (LED) display the welding parameter selection.
It is only possible to change the basic welding parameters if:
No welding current is flowing and
The key switch (option) is set to position “1”.
Operating
element
Action Result
Select and display welding process.
Select and display electrode diameter / ignition optimisation.
•
TIG - Synergic:
Select electrode diameter (ignition optimisation is determined
automatically).
•
TIG - Manual:
Select ignition optimisation.
Select and display material type or welding current polarity.
•
TIG - Synergic:
Select material type (welding current polarity is determined
automatically).
•
TIG - Manual:
Select welding current polarity.
Select and display seam type.
Select and display operating mode.
