Machine description
– quick overview
Machine control
– Operating elements
099-000109-EW501
23.08.2018
25
Item Symbol
Description
0
4
Select seam type button
------- Fillet weld
-------- Butt joint
------- Fillet weld - lap joint
--------- Vertical-down
5
Operating mode / Power-saving mode button
-- spotArc / spotmatic (spot time setting range)
--------- Non-latched
------ Latched
Press for 3 s to put machine into power-saving mode. To reactivate, activate one of the
operating elements
> see 5.11 chapter
.
6
Pulsing push-button
> see 5.3.13 chapter
------ Automated pulsing (frequency and balance)
-------- Signal light turns green: Thermal pulsed TIG welding/MMA pulsing/average
value pulses
-------- Signal light turns red: Metallurgical pulsed TIG welding (kHz pulsing)/average
value pulses
--- Special TIG AC
7
Synchronisation types key button (two-sided, simultaneous welding)
Synchronisation via mains voltage
Synchronisation via cable
8
Gas test/rinse hose package button
> see 5.3.2 chapter
9
Error/status indicators
-------
Collective interference signal light
--------- Water deficiency signal light (welding torch cooling)
---------- Excess temperature signal light
--------- S safety sign signal light
10
Display switching button
------- Material thickness display
VOLT --- Welding voltage display
JOB ----- JOB number display
PROG --- Program number display
11
Welding parameter setting rotary transducer
Setting of all parameters such as welding current, sheet metal thickness, gas pre-flow
time, etc.
12
Welding data display (3-digit)
Displays the welding parameters and the corresponding values
> see 5.2 chapter
13
Status displays
--- After each completed welding task, the last values used in the welding pro-
cess for the welding current and welding voltage are shown on the displays,
and the signal light will be on
-- Direct current welding
-- Alternating current welding
and
simultaneously: Alternating current welding, AC special
14
Functional sequence
> see 4.3.1 chapter
