Design and function
PC interface
099-000109-EW501
23.08.2018
91
5.10 PC interface
PC 300 welding parameter software
Set all welding parameters on the PC and simply transfer to one or more welding machines (accessory,
set consisting of software, interface, connection leads)
• Manage up to 510 JOBs
• Exchange JOBs with the welding machine
• Online data communication
• Default settings for welding data monitoring
• Always up-to-date thanks to standard update function for new welding parameters
• Data backup by easy communication between power source and PC
Figure 5-76
Item Symbol
Description
0
1
PC interface, serial (D-Sub connection socket, 9-pole)
2
Connection cable, 9-pole, serial
3
SECINT X10 USB
4
USB connection
5
Windows PC
Equipment damage or faults may occur if the PC is connected incorrectly!
Not using the SECINT X10USB interface results in equipment damage or faults in signal trans-
mission. The PC may be destroyed due to high frequency ignition pulses.
• Interface SECINT X10USB must be connected between the PC and the welding machine!
• The connection must only be made using the cables supplied (do not use any additional ex-
tension cables)!
5.11 Power-saving mode (Standby)
You can activate the power-saving mode by either pressing the push-button
> see 4.3 chapter
for a pro-
longed time or by setting a parameter in the machine configuration menu (time-controlled power-saving
mode
)
> see 5.13 chapter
.
When power-saving mode is activated, the machine displays show the horizontal digit in the
centre of the display only.
Pressing any operating element (e.g. turning a rotary knob) deactivates power-saving mode and the ma-
chine is ready for welding again.
5.12 Access control
These accessory components can be retrofitted as an option
> see 9 chapter
.
To protect against unauthorised or unintentional adjustment of the welding parameters on the machine,
the control input can be locked with the aid of a key switch.
Key position 1 =
All parameters can be set
Key position 0 =
Only the following operating elements are functional:
• “Operating mode” button
• “Welding parameter setting” rotary transducer
• “Display switching” button
• “TIG pulse welding” button
• “Select welding parameters” button
• “Gas test” button
