Design and function
TIG welding
36
099-000099-EW501
29.08.2014
5.8.3.2
Save welding tasks (JOBs)
You can select, change and save the required welding parameters for recurring welding tasks (JOBs) in
up to 7 JOBs (JOB 1 to JOB 7).
5.8.3.3
Displaying and changing the JOB number
Operating
element
Action
Result
n x
Select JOB display
Change the JOB number
1 x
If the display switchover is pressed or if there is no keyboard input for 5
seconds, the new JOB will be active
NOTE
The procedure for setting welding tasks is the same as described under "Manual,
standard operation (JOB 0)". A JOB can only be switched if no welding current is
flowing.
The up-slope and down-slope times can be set separately for non-latched and latched.
