Design and function
TIG welding
34
099-000157-EW501
16.10.2014
5.8.3
Welding data display
The following welding parameters can be displayed before (nominal values) or during (actual values)
welding.
Parameter
Before welding
(nominal values)
During welding
(actual values)
Welding current
Welding voltage
JOB number
Parameter times
Parameter currents
possible
not possible
5.8.4
Select welding task
Operating
element
Action Result
Select and display welding process
MMA welding
TIG welding
Select and display operating mode
spotArc (spot time setting range 0.01 sec. to 20.0 sec.)
Non-latched
Latched
Select and display pulse procedure
TIG automated pulses (frequency and balance)
TIG pulses
Select welding parameter in the function sequence
Set welding parameters
5.8.4.1
Welding parameter setting
The parameters that can be set in the function sequence of the machine control depend on the selected
welding task. This means that if for example you have not selected a pulse variant, then you cannot set
any pulse times in the function sequence.
5.8.5
Optimising the ignition characteristics for pure tungsten electrodes
To optimise the ignition behaviour, the tungsten electrode diameter used should be set in the Expert
menu (parameter ndA) .
