Design and function
Machine configuration menu
64
099-000157-EW501
16.10.2014
5.12.4
Limiting the mains current (10A)
If the plug socket has a 10A mains fuse in order to comply with national regulations, it may be necessary
to reduce the mains current of the welding machine to 10A in order to avoid triggering the fuse. This
restricts the welding machine's power input. The maximum welding performance cannot be achieved
when the current is limited to 10A.
ENTER
EXIT
NAVIGATION
+
l
0
Figure 5-30
Display
Setting/selection
Lock JOB menu
Protect welding parameters from unauthorised access
Service menu
Service settings
Exit the menu
Exit
Mains current limit
Mains current limited to 16A
Mains current limit
Mains current limited to 10A
