Machine description
– quick overview
Machine control
– Operating elements
099-005339-EW501
31.01.2014
25
Item Symbol
Description
0
1
Lid
(see chap. "Machine control
– concealed operating elements")
2
Display, left
Welding current, material thickness, wire speed, hold values
3
Push-button, parameter selection left/power-saving mode
AMP
Welding current
Material thickness
Wire feed speed
Hold
After welding, the values used last are shown from the main program. The
signal light is illuminated.
STBY
Press for 2 s to put machine into power-saving mode.
To reactivate, activate one of the operating elements.
4
Display, JOB
Shows the currently selected welding task (JOB number).
5
Welding parameter setting, rotary dial
For setting the welding performance, for selecting the JOB (welding task) and for
setting other welding parameters.
6
Select operating mode button
Non-latched
Latched
Signal light lights up in green: Special non-latched
Signal light lights up in red: MIG spot welding
Special latched
7
Push-button, throttling effect (arc dynamics)
Arc is harder and more narrow
Arc is softer and wider
8
Arc length correction/selection of welding program, rotary dial
• Correction of the arc length from -9.9 V to +9.9 V.
• Selection of welding programs 0 to 15 (not possible if accessory components, such
as program torches, are connected).
9
Button, Parameter selection (right)
VOLT
Welding voltage
Prog
Program number
kW
Welding performance display
Gas flow quantity (optional)
10
Display, right
Welding voltage, program number, motor current (wire feed mechanism)
