Welding procedure
TIG welding
32
099-00T400-EW501
21.10.2016
4.1.10.2 Thermal pulsing
The operation sequences basically match the standard welding sequences, but there is an additional
switching back and forth between the main current AMP (pulse current) and the secondary current AMP%
(pulse pause current) at the set times. Pulse and pause times and the pulse edges (
and
) are
entered in seconds on the control.
Figure 4-17
The pulse function can also be deactivated if necessary during the up-slope and down-slope
phases (parameter
) > see 4.7 chapter.
Figure 4-18
