Design and function
Transport and installation
099-700003-EW501
14.09.2020
19
5.2.7 Welding data display
The display shows the currently selected welding parameter and the corresponding parameter value.
When the welding machine is switched on, the display shows the nominal welding current set point set
point set by the control unit.
During the up/down operation, the corresponding parameter value is shown on the display when the para-
meter is changed. If this parameter is not changed for more than approx. 5 s, the display switches back to
the values set by the control unit.
Examples for welding parameters in the welding data display
Welding parameters
Display
Welding current
Wire feed speed
Voltage correction
Programs
JOB number
5.2.8 Operating elements for RD3 welding torch
Figure 5-4
Item Symbol Description
0
1
OLED display
Graphical display to show the functions.
2
Parameter selection push-button
Welding parameters are selected one after the other.
3
Parameter selection push-button
Welding parameters are selected one after the other.
4
Push-button “+”
Increase JOB number or parameter value.
5
Push-button “-”
Decrease JOB number or parameter value.
