Design and function
Transport and installation
20
099-700003-EW501
14.09.2020
5.2.9 Welding data display
The display shows the currently selected welding parameter and the corresponding parameter value.
When the welding machine is switched on, the display shows the nominal welding current set point set
point set by the control unit.
During the up/down operation, the corresponding parameter value is shown on the display when the para-
meter is changed. If this parameter is not changed for more than approx. 5 s, the display switches back to
the values set by the control unit.
Examples for welding parameters in the welding data display
Welding parameters
Display
Welding current
Wire feed speed
Welding voltage
Programs
Welding procedure
Dynamics
Fault, error message
